How Night Vision Works

Night vision is the ability to see in a dark environment. Whether by biological or technological means, night vision is made possible by a combination of two approaches: sufficient spectral range and sufficient intensity range. Humans have poor night vision compared to many animals, in part because the human eye lacks a tapetum lucidum.

In biological night vision, molecules of rhodopsin in the rods of the eye undergo a change in shape as they absorb light. Rhodopsin is the chemical that allows night vision, and is extremely sensitive to light. Exposed to a spectrum of light, the pigment immediately bleaches, and it takes about 30 minutes to regenerate fully, but most of the adaptation occurs within the first five or ten minutes in the dark. Rhodopsin in the human rods is less sensitive to the longer red wavelengths of light, so many people use red light to help preserve night vision as it only slowly depletes the eye's rhodopsin stores in the rods and instead is viewed by the cones.

Great Horned Owl
Photo: The Great horned Owl is nocturnal (most active at night) & has the natural ability to see well in the darkness of night.

Many animals have a tissue layer called the tapetum lucidum in the back of the eye that reflects light back through the retina, increasing the amount of light available for it to capture. This is found in many nocturnal animals and some deep sea animals, and is the cause of eyeshine. Humans lack a tapetum lucidum.

Nocturnal mammals have rods with unique properties that make enhanced night vision possible. The nuclear pattern of their rods changes shortly after birth to become inverted. In contrast to contemporary rods, inverted rods have heterochromatin in the center of their nuclei and euchromatin and other transcription factors along the border. In addition, the outer nuclear layer (ONL) in nocturnal mammals is thick due to the millions of rods present to process the lower light intensities of a few photons. Rather than being scattered, the light is passed to each nucleus individually. In fact, an animal's ability to see in low light levels may be similar to what humans see when using first or second generation image intensifiers.

A larger size of pupil relative to the rest of the eye, also aids night vision.

Night vision technologies

Night vision technologies can be broadly divided into three main categories

Image intensification
Image intensification technologies work on the principle of magnifying the amount of received photons from various natural sources such as starlight or moonlight. Examples of such technologies include night glasses and low light cameras.

Active illumination
Active illumination technologies work on the principle of coupling imaging intensification technology with an active source of illumination in the near infrared (NIR) or shortwave infrared (SWIR) band. Examples of such technologies include low light cameras.

Thermal imaging
Thermal imaging technologies work by detecting the temperature difference between the background and the foreground objects.

Active infrared

Active infrared night vision combines infrared illumination of spectral range 0.7-1 μm (just below the visible spectrum of the human eye) with CCD cameras sensitive to this light. The resulting scene, which is apparently dark to a human observer, appears as a monochrome image on a normal display device.

Because active infrared night vision systems can incorporate illuminators that produce high levels of infrared light, the resulting images are typically higher resolution than other night vision technologies. Active infrared night vision is now commonly found in commercial, residential and government security applications, where it enables effective night time imaging under low light conditions. However, since active infrared light can be detected by night vision goggles, it is generally not used in tactical military operations.

Laser range gated imaging

Laser range gated imaging is another form of active night vision which utilizes a high powered pulsed light source for illumination and imaging. Range gating is a technique which controls the laser pulses in conjunction with the shutter speed of the camera's detectors. Gated imaging technology can be divided into single shot, where the detector captures the image from a single light pulse to multi-shot, where the detector integrates the light pulses from multiple shots to form an image.

One of the key advantages of this technique is the ability to perform target recognition as opposed to detection with thermal imaging.

Thermal vision

Thermal imaging cameras are excellent tools for night vision. They perceive thermal radiation and do not need a source of illumination. They produce an image in the darkest of nights and can see through light fog, rain and smoke. Thermal imaging cameras make small temperature differences visible. Thermal imaging cameras are widely used to complement new or existing security networks.

Image intensifier

Gen 3 Image TubeThe image intensifier is a vacuum-tube based device that converts visible light from an image so that a dimly lit scene can be viewed by a camera or the naked eye. While many believe the light is "amplified," it is not. When light strikes a charged photocathode plate, electrons are emitted through a vacuum tube that strike the microchannel plate that cause the image screen to illuminate with a picture in the same pattern as the light that strikes the photocathode, and is on a frequency that the human eye can see. This is much like a CRT television, but instead of color guns the photocathode does the emitting.

The image is said to become "intensified" because the output visible light is brighter than the incoming IR light, and this effect directly relates to the difference in passive and active night vision goggles. Currently, the most popular image intensifier is the drop-in ANVIS module, though many other models and sizes are available on the market.

Pioneering I2 Technology
The idea of an image tube was first proposed by G. Holst and H. De Boer (Netherlands) in 1928 but early attempts to create one were not successful. It was not until 1934 that Holst, working for Philips, created the first successful infrared converter tube. This tube consisted of a photocathode in close proximity to a fluorescent screen. Using a simple lens, an image was focused on the photocathode and a potential difference of several thousand volts was maintained across the tube, causing electrons dislodged from the photocathode by photons to strike the fluorescent screen. This caused the screen to light up with the image of the object focused onto the screen, however the image was non-inverting. With this image converter type tube, it was possible to view infrared light in real time, for the first time.

Night vision devices

A night vision device (NVD) is a device comprising an image intensifier tube in a rigid casing, commonly used by military forces. Lately night vision technology has become more widely available for civilian use, for example, EVS, or enhanced vision systems, which are included in the latest avionics packages in cirrus and Cessna planes to help pilots with situational awareness and avoid accidents. EVS is also available for rotary wing operators.

Expanded View

Exploded View


[1] Front Lens
[2] Photocathode
[3] Microchannel Plate
[4] High Voltage Power Supply
[5] Phosphor Screen
[6] Eyepiece
[7] Image Intensifier

The objective lens (1) of a night vision device collects light that can't be seen with the naked eye and focuses it on the image intensifier (7). Inside the image intensifier a photocathode (2) absorbs this light energy and converts it to electrons. These electrons are then drawn toward a phosphor screen (5). In 2nd and 3rd generation intensifiers the electrons first pass through a microchannel plate (3) that further multiplies them thousands of times. When this highly intensified electron image strikes the phosphor screen (5), it causes the screen to emit visible light. Since the phosphor screen emits this light in exactly the same pattern and contrast as collected by the objective lens, the bright nighttime image seen through the eyepiece corresponds precisely to the observed scene.

A specific type of NVD, the night vision goggle (or NVG) is a night vision device with dual eyepieces; the device can utilize either one intensifier tube with the same image sent to both eyes, or a separate image intensifier tube for each eye. A Night vision goggle combined with magnification lenses constitutes night vision binoculars. Other types include night vision monoculars with one eyepiece which may be mounted to firearms as night sights. NVG and EVS technologies are becoming standard operating products on helicopter operations to improve safety. The NTSB is considering EVS as recommended equipment for safety features.

Sources: Wikipedia

Search

Live chat Support from Night Optics USA

Types of ranges

Spectral range
Night-useful spectral range techniques can sense radiation that is invisible to a human observer. Human vision is confined to a small portion of the electromagnetic spectrum called visible light. Enhanced spectral range allows the viewer to take advantage of non-visible sources of electromagnetic radiation (such as near-infrared or ultraviolet radiation). Some animals can see using much more of the infrared and/or ultraviolet spectrum than humans.

Visible light spectrum

Intensity range
Sufficient intensity range is simply the ability to see with very small quantities of light. Although the human visual system can, in theory, detect single photons under ideal conditions, the neurological noise filters limit sensitivity to a few tens of photons, even in ideal conditions.

Many animals have better night vision than humans do, the result of one or more differences in the morphology and anatomy of their eyes. These include having a larger eyeball, a larger lens, a larger optical aperture (the pupils may expand to the physical limit of the eyelids), more rods than cones (or rods exclusively) in the retina, a tapetum lucidum.

Enhanced intensity range is achieved via technological means through the use of an image intensifier, gain multiplication CCD, or other very low-noise and high-sensitivity array of photodetectors.